UDS1100 / UDS1100-PoE

External Device Servers

Network virtually any device in minutes
Access, monitor and control equipment over Ethernet
Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
Configure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix DeviceInstaller™ utility
Supports RS232, RS422 and RS485 communications
Environmentally-friendly RoHS and WEEE compliant
Small enough to place almost anywhere
Features TruPort® Com port control technology (also see UDS2100)
Power over Ethernet (PoE) model available
Meets the newest UL 864 9th Edition standards

Features & Specifications

Serial Interface

Interface

Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)

Connectors

1 DB25F DCE serial port

Data Rates

Software-selectable baud rate from 300 to 230 KBaud

Serial Line Format

Characters

7 or 8 data bits

Parity

odd, even, none

Stop Bits

1 or 2

Flow Control

Control Signals

CTS/RTS (Hardware)

Flow Control

XON/XOFF (Software)

Network Interface

Interface

10Base-T/100Base-TX Ethernet port

Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex

Connector

RJ45

Standards

ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP

Indicators (LED)

Power, 10/100 Link/Activity (green)
100/100 Link/Activity (green)
Diagnostics (red)
Status (green)

Processor

CPU

Lantronix DSTNI-EX 48 MHz clock

Memory

256 KB zero wait state SRAM, 2 MB Flash

Management

Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP

Power

UDS1100

9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
9-30 VDC on DB25F serial interface

UDS1100-PoE

Powered over Ethernet via 802.3AF compliant power source

Environmental

Operating

0° to 60° C (32° to 140° F)

Storage

-40° to 85° C (-40 to 185° F)

Agency Approvals

UL, CSA, FCC, CE, TUV, CTick, VCC, UL 864

Software

Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ software and related utilities

Packaging

Material

Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available

Dimensions (LxWxH)

9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in)

Weight

0.20 kg (0.45 lb)

IP Rating

30

Shipping Dimensions

Dimensions (LxWxH)

35.5 x 17.1 x 7.6 cm (14 x 6.75 x 3 in)

Weight

1.5 kg (3.0 lbs)

Emissions

FCC Part 15 Subpart B Class A	Radiated Emissions 30MHz – 1000MHz
ICES-003 Issue 4 February 2004 Class A	Radiated Emissions 30MHz – 1000MHz
AS/NZS CISPR 22: 2004 Class A	Radiated Emissions 30MHz – 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A	Radiated Emissions 30MHz – 1000MHz
VCCI V-3/2005.04 Class A	Radiated Emissions 30MHz – 1000MHz
EN61000-3-2: 2000 Class A	Harmonic Current Emissions
EN61000-3-3: 1995 + A1: 2001	Fluctuations and Flicker

Immunity

EN55024: 1998	+A1: 2001 +A2: 2003
IEC_61000-4-2: 1995	ESD 8kV Air Discharge (Direct), 4kV Contact Discharge (Direct/Indirect)
IEC_61000-4-3: 1995	Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC_61000-4-4: 1995	EFT/Burst 1.0kV Power Lines, 0.5kV I/O Lines
IEC_61000-4-5: 1995	Surge Immunity 1.0kV Common Mode, 1.0 kV Differential Mode
IEC_61000-4-6: 1996	Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC_61000-4-8: 1993	Magnetic Field Immunity 50Hz 1.0 Arms/m
IEC_61000-4-11: 1994	Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)

Isolation

Designed with protection against transients and ESD for use under harsh environments.

Serial Port

15 kV ESD protection on RS232 and RS422/485 transceivers

Power Input

Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages

Ethernet Port

1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

Documentation

Firmware / Utilities

UDS1100 Firmware - (FAQ 1273)
DeviceInstaller - (FAQ 644)

UD1100002-01 - Lantronix UDS1100 Serial-to-Ethernet devices server