WIZnet - WizFi250 802.11 b/g/n Compact Size WiFi module

WizFi250 is a small size wireless modules, 28×20 mm (17×20 mm w/o antenna) , for the highest level of integration, featuring 802.11b/g and 802.11n. It includes a 2.4 GHz WLAN CMOS power amplifier (PA) that meets the output power requirements of most handheld systems. Along with the integrated power amplifier, the WizFi250 also includes integrated transmit and receive baluns, further reducing the overall solution cost. The small size and low profile physical design eases enabling high performance wireless connectivity without space constraint in system designs. Hardware WAPI acceleration engine, AES, TKIP, WPA and WPA2 are supported to provide your network with the latest security requirements.

For software and driver development, WIZnet provides extensive technical documents and reference software codes for system integration.

Key Feature

- Integrated RF power amplifier : Antenna calibration is not required
- 1MB Flash Memory, 128KB SRAM and 1MB Serial Flash
- Supports Low power consumption through dynamic power management mode
- Provides the highest compatibility with the most of APs
- Compact Size to fit into any kind of target device, even handheld device such as mobile, PDA and etc
- Single band 2.4GHz IEEE 802.11b/g/n
- Providing flexible system configuration through Web
- RoHS
- Device Package : 28×20 mm (17×20 mm)
- Serial Interface : UART, SPI
- Powerful Web server interface
- Soft AP

Sufficient memory retention
Wi-Fi Security (WEP, WPA/WPA2PSK)
L2 Switching
- OTA(Firmware Uploading Over the Air)
- WiFi Direct (going to be prepared by 4Q 2013)

Documents

? WizFi250 Datasheet

? WizFi250 Programmer's Guide

? WizFi250 Quick Start Guide

? WizFi250 WizFi250 EVB SCH

Wiznet WizFi250 802.11b/g/n compact WiFi module