XPress-DR / XPress-DR-IAP

External Device Server

Connect enterprise (ERP,MES) systems to factory floor devices without disturbing existing control networks
Allow remote firmware upgrades, saving money and time from manual upgrades
IAP version supplies many industrial communication protocols
Configurable serial interface supports RS-232, RS-422, or RS-485
10Base-T/100Base-TX Ethernet (RJ45)
Isolated serial and Ethernet ports
FM-approved for hazardous locations Class I, Div. 2
RoHS Compliant

Serial Interface
Interface	RS-232, RS-422, or RS-485
Connector	Screw terminals or RJ45
Data Rates	300 to 115,200 bps
Characters	7 or 8 data bits
Parity	odd, even, none
Stop Bits	1 or 2
Flow Control
Software	XON/XOFF
Hardware	RTS/CTS
Installable Serial Protocols (XPress-DR-IAP only)
Network Interface
Standards	ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP, DHCP, TFTP, Telnet, and HTTP
Interface	10Base-T/100Base-TX Ethernet
Connector	RJ45
Installable application layer protocols (XPress-DR-IAP only)
Indicators
Ready, Fault/Configuration, Activity, Link, Serial Transmit Data, Serial Receive Data
Management
SNMP, serial, Telnet, and HTTP (web browser)
Isolation
Ethernet	1500 Vrms
Serial	2000 Vrms
Power
Input	9 to 30VDC/9-24VAC, 3W maximum
Connector	Screw terminals for power and ground
Environmental (Operating)
Temperature	0° to 60°C (32° to 140°F)
Humidity	20% to 90% RH, non-condensing
Packaging
Mounting	DIN-rail (35 mm)
Material	High-impact plastic
Dimensions (LxWxH)	6.09 x 3.55 x 8.8 cm (2.4 x 1.4 x 3.5 in)
Agency Approvals
UL, CSA,TUV, FCC, CE, FM Class I, Div. 2
Software
Included Windows® 95/98/ME/NT/2000-based configuration software simplifies initial setup
Shipping
Dimensions (LxWxH)	18.7 x 22.9 x 11.1 cm (7.375 x 9.0 x 4.375 in)