Sku: G62-4G

AUD$239.73
Availability: 2 In Stock
Sku: G62-4G
Cellular/GPRS/HSPA
Digital Matter

The G62 equipped with ultra-rugged enclosure, feature-rich vehicle, trailer, or heavy equipment tracking device with customizable inputs/outputs, remote immobilization for fleet management, equipment monitoring, driver ID, theft recovery, and more

  • High-precision GPS/GLONASS tracking device
  • Hardwired to permanent power for real-time tracking
  • Ultra-rugged and weatherproof IP67 nylon glass housing with compact and ergonomic design
  • Internal Backup Battery in case of loss of power or tampering
  • 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input
  • Configure iButton® for Driver ID
  • Run hour monitoring, accident and rollover detection, speeding, harsh braking, and more
  • Cellular 2G or 4G LTE-M / NB-IoT

 

    CONNECTIVITY

    The G62 is available in either 2G or 4G LTE-M / NB-IoT.

    2G 2G: SARA-G350-02S-01
    850/900/1800/1900 MHz
    4G LTE-M / NB-IoT uBlox SARA-R410M Modem operates on all major global LTE-M and NB-IoT bands.
    Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 26*, 28 (*roaming bands)
    SIM Size & Access Internal Micro 3FF SIM

     

    LOCATION

    Module uBlox EVA-M8
    Constellation Concurrent GPS / GLONASS
    Channels 72 Channel High Sensitivity Receiver
    Tracking Sensitivity -167dBm industry-leading tracking performance
    AssistNow Offline GNSS aiding data (such as ephemeris, time, coarse position) for a faster Time To First Fix (TTFF).
    Low Noise Amplifier GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail.

     

    POWER

    Input Voltage 8-36V DC (max)
    Self-Resetting Fuse Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to ensure operation in the harshest electrical systems.
    Operating Current ~25/50mA when moving
    ~150mA battery charging
    Sleep Current <1mA
    Back-Up Battery 1100mAh LiPo internal backup battery pack

     

    MECHANICS / DESIGN

    Dimensions L 125 x W 80 x H 25 mm
    Weight 170g
    Housing Ultra-Rugged Nylon Glass
    IP Rating IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures.
    -20°C to +60°C (connected to external power)
    Installation 7 wire harness
    1m Length
    Operating Temperature -20°C to +60°C (connected to external power)
    At < 0°C and > +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.
    GPS Antenna Internal
    Cellular Antenna Internal
    3-Axis Accelerometer 3-Axis Accelerometer to detect movement, acceleration, high G-force events, and more.
    Diagnostic LED Diagnostic LED signifies operation status.
    Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.

     

    INTERFACES

    Digital Inputs 2 x Digital Inputs with configurable pull-up/down
    0-48V DC input range
    On/Off thresholds:
    Pull-up enabled: low at 0.8V, high at 1.0V
    Pull-down enabled: low at 2.0V, high at 2.4V
    Digital Outputs 1 x Switched Ground Digital Output
    Easily wired up to switch external lights, relays, buzzers, etc.
    Can be used to immobilize a vehicle
    Ignition 1 x dedicated ignition Digital Input 0-48V DC
    5V on/off threshold
    1-Wire® or iButton® 1-Wire® or “iButton®” can be used to read Driver ID tags. Readers available to suit multiple card formats.

     

    SMARTS

    Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware.
    Accident & Rollover Detection Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before / 10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident.
    Driver ID Options iButton® interface for Driver ID, access control, and logbooking.
    Driver Safety & Behavior Monitor speeding, harsh acceleration, braking, cornering, idle times and more to improve safety and prevent unnecessary wear on vehicles.
    Geofencing Create custom geofences and alerts if an asset enters or leaves specific locations.
    Geofence Download to Device Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts.
    Maximum of 20 Geofences with up to 30 points per geofence.
    In-Vehicle Alerts Can be wired up to external buzzers or lights for in-vehicle alerts.
    Lone Worker Safety Interface a variety of duress pendants to enable man-down alerts for lone worker safety monitoring.
    Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs.
    Real-Time Tracking Device remains continuously connected while on the move for real-time asset tracking.
    Theft Recovery
    Switch to Recovery Mode in the case of theft or loss to activate real-time tracking at 30-second intervals for asset retrieval.
    Remote Immobilization Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse, or unauthorized usage.
    Run Hour Monitoring Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization.
    Sensor Monitoring Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.
    Tamper Alerts Instant alert if the device is removed from your asset or disconnected from its power source.

     

    DEVICE MANAGEMENT

    Flexible Configuration Configure device parameters such as heartbeat rate, movement and accelerometer settings, and more to fit any tracking application.
    OEM Server Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system.

     

    INTEGRATION

    Third-Party Integration Webhook, TCP or HTTPS, Direct and Data Splitting Integration Options

     

    SECURITY

    Data Security Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data.
    Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

     

    WARRANTY

    Manufacturer’s Warranty One year manufacturer’s warranty.

     

    CERTIFICATIONS

    Please contact us for a full list of compliance specifications and documentation for your region. 4G – FCC, ISED, ACMA (DoC), CE (DoC)
    2G – ICASA, CE (DoC)

     

    Datasheet: G62-4G product brief.pdf

     

     

     

    G62 - 4G LTE Cat M1 / NBIoT Hardwired GPS tracking sensor

    Sku: G62-4G

    Just added to your wishlist:
    My Wishlist
    You've just added this product to the cart:
    Go to cart page