10A Solar charger + POE inject + IDC output in max 10A;
|POE Input Voltage
|36 to 57VDC
|Solar panel Input Voltage
|18V to 45VDC
|Solar panel charge current
|IDC Output Voltage / current
|12VDC / 10A
|POE Output Voltage / current
|56VDC / 0.625A
|-40C to 60C
|118W x 40H x 150L mm
5.1 Battery Polarity Reverse Protection:
If only battery connected to terminal, when the battery polarities were reversed, the model will stop output and REV indicator light on. When the battery be removed and re-connected to terminal, the function will be disable, if there is PoE power sources connected, when the battery polarities reversed, the fuse will be burnt.
5.2 Battery Over Discharge Protection:
Cuts off the load when the battery voltage is lower than 11V + 0.3V, and auto recover when the battery voltage returns to 12 V + 0.3V
5.3 Battery Over Charge Protection:
Fuse control, over 10A, the fuse will be burnt.
5.4 Solar Panel Polarity Reverse Protection:
When solar panel polarities be reversed, the charger stop output, it won’t damage the charger or end device
5.5 Solar Panel Over Charge Protection:
When charge current over 10A, the fuse will be burnt.
5.6 Output Short Circuit Protection:
When the rear output terminal or PoE output be short circuit, protection be active, the product stop output and auto-recover when the terminal back to normal connection.
5.7 Battery Output Current Limit:
The fuse will be burnt when battery output current over 10A
5.8 Load Output Voltage Limit:
The output voltage of the rear terminal is the same as battery.