Sku: UD2100002-01

AUD$418.30
Availability: Many In Stock
Sku: UD2100002-01
Ethernet
Lantronix

UDS2100

External Device Server

  • Network virtually any device in minutes
  • Access, monitor and control equipment over Ethernet
  • Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
  • Configure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix DeviceInstaller™ utility
  • Two DB9M DTE serial ports supporting RS232, RS422 and RS485
  • Environmentally-friendly RoHS and WEEE compliant
  • Features TruPort® Com port control technology (also see UDS1100)

Features & Specifications

Serial Interface
Interface Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Connectors 2 DB9M DTE serial ports
Data Rates Software-selectable baud rate from 300 to 921 KBaud
Characters 7 or 8 data bits
Parity odd, even, none
Stop Bits 1 or 2
Control Signals CTS/RTS (Hardware)
Flow Control XON/XOFF (Software)
Network Interface
Interface 10Base-T/100Base-TX Ethernet port
  • Software selectable Ethernet speed 10/100/Auto
  • Software selectable Half/Full/Auto duplex
Connector RJ45
Standards ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, and RFC2217
Indicators (LED)
  • Power (blue)
  • RXI Serial (Activity) (green)
  • TXI Serial (Activity) (yellow)
  • RX2 Serial (Activity) (green)
  • TX2 Serial (Activity) (yellow)
  • RJ45 LEDs Link (100=green,10=yellow)
  • Act (Full=green, Half duplex=green)
Processor
CPU Lantronix DSTNI-EX 48 MHz clock
Memory 256 KB zero wait state SRAM, 2 MB Flash
Management
  • Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP
Power
  • 9-30 VDC on barrel connector (1.8 Watts maximum consumption)
Environmental
Operating 0° to 60° C (32° to 140°F)
Storage -40° to 85° C (-40 to 185°F)
Packaging
Material Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available
Dimensions (LxWxH) 9.5 x 7.2 x 2.3 cm (3.7 x 2.8 x 0.9 in)
Weight 0.4 kg (0.9 lb)
IP Rating 30
Agency Approvals
  • FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Shipping Dimensions
Dimensions (LxWxH) 35.5 x 17.1 x 7.6 cm (14 x 6.75 x 3 in)
Weight 1.5 kg (3.0 lbs)
Included Software
  • Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ software and related utilities
Emissions
FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHz
ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz – 1000MHz
AS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz – 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz – 1000MHz
VCCI V-3/2005.04 Class A Radiated Emissions 30MHz – 1000MHz
EN61000-3-2: 2000 Class A Harmonic Current Emissions
EN61000-3-3: 1995 + A1: 2001 Fluctuations and Flicker
Immunity
EN55024: 1998 +A1: 2001 +A2: 2003
IEC_61000-4-2: 1995 ESD 8kV Air Discharge (Direct), 4kV Contact Discharge (Direct/Indirect)
IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC_61000-4-4: 1995 EFT/Burst 1.0kV Power Lines, 0.5kV I/O Lines
IEC_61000-4-5: 1995 Surge Immunity 1.0kV Common Mode, 1.0 kV Differential Mode
IEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/m
IEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)
Isolation
  • Designed with protection against transients and ESD for use under harsh environments.
Serial Port 15 kV ESD protection on RS232 and RS422/485 transceivers
Power Input Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages
Ethernet Port 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

Documentation

 

Firmware / Utilities

UD2100002-01 - Lantronix UDS2100 Serial-to-Ethernet Device Server

Sku: UD2100002-01

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page