LSN50v2 is a Long Range LoRaWAN Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use, power consumption and secure data transmission.It is...

The Dragino PS-LB-NA is a LoRaWAN Analog Sensor for Internet of Things solution. PS-LB-NA has 5v and 12v output , 4~20mA, 0~30v input interface to power and get value from Analog Sensor....

The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.RS485-LN allows the user to monitor /...

TThe Dragino LT series I/O Modules are Long Range LoRa I/O Controller. It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and...

The Dragino SW3L is a LoRaWAN Flow Sensor. It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to monitor the water usage for buildings. SW3L is...

The Dragino RS485-BL is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions.User can connect RS485 or UART sensor to RS485-BL converter, and configure RS485-BL toperiodically read sensor data...

The Dragino LDDS75 is a LoRaWAN Distance Detection Sensor for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance...

ELE-TYPEC-F-PCB is a Type C female connector Fan out board which is a essential tooling for most developer, and also suitable to be used in programthe Dragino sensor   Driver:...

The MS48-LR serves as a robust LoRaWAN-to-Modbus gateway, seamlessly integrating long-range wireless sensor networks with industrial control systems. This open-source device bridges LoRa communications to IP networks through WiFi, Ethernet,...

  The Dragino LHT65 series programming cable is designed specifically for the LHT65 sensor devices. Featuring a USB to Type-C connection and built with the CH340G chipset, this cable is...

The Dragino MDS200-LB/LS is a LoRaWAN Microwave Radar distance sensor. It uses 24Ghz Microwave to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is more reliable...

The Dragino MDS120-LB/LS is a LoRaWAN Microwave Radar distance sensor. It uses use Microwave Radar to detect the distance between sensor and different objects. Different from ultrosonic or Lidar measurement. Microwave...

he Dragino SDI-12-LB is a SDI-12 to LoRaWAN Converter designed for Smart Agriculture solution. It turns your exisitng SDI-12 device into LoRawan communication. SDI-12 (Serial Digital Interface at 1200 baud) is an asynchronous serial communications protocol...

The Dragino SW3L is a LoRaWAN Flow Sensor. It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to monitor the water usage for buildings. SW3L is...

The Dragino SW3L is a LoRaWAN Flow Sensor. It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to monitor the water usage for buildings. SW3L is...

The Dragino LTC2 Industrial LoRaWAN Temperature Transmitter is designed to monitor temperature for different environment. It supports to read PT100 probe and convert the value to temperature and uplink to IoT server via...